This 3D Printer is a Himalayan brand 3D Printer Module. It is created by the Himalayan Solution Industry. This 3D Printer Module is made up of high quality wooden material body. It supports dual extruder, PLA & ABS, Offline printing and many more. It has various features like: - Cost effective, Portable, Light weight, uses DRV 8825 driver which provides more accurate steps, Mesh bed leveling of 9 points, Uses 4 layer motherboard which provides maximum heat dissipation for longer printing and many more. It can be suitable for hobbyists as well as various DIY projects.

POS - 3 INCH DIRECT THERMAL BARCODE + RECEIPT PRINTER
BRAND - XPRINTER
MODEL - XP-365B
PRINT SPEED UP TO 127MM/S
2 IN 1 - BARCODE + RECEIPT PRINTER
DIRECT THERMAL PRINTING
PRINT RESOLUTION - 203 DPI
USB INTERFACE
SUPPORT LABEL PAPER AUTO DETECTION

 TPU filament 1.75mm

High Elasticity & Strength

Duramic TPU is a perfect choice if you want to print rubber-like flexible and resistant models, parts, jigs and tools, etc.

Features :

1. Large screen display 128×64 LCD (3.2″)
2. SD card slot at the back, able to directly select a file and print
3. The product comes encoder parameter adjustment can be achieved, and the file selection print
4. Plug & play on the RAMPS, but need to modify the firmware to support.
5. LCD 12864 Smart Controller fully supported by Marlin Firmware.

Package Includes :

1 x  128×64 Smart LCD controller for ramps 1.4.
1 x Smart Adapter.
2 x 30cm FRC Cable.

The 3D Printer LCD is a Reprap Ramps 1.4 2004 LCD Smart Controller Display Adapter Module for 3D Printer. This intelligent controller includes an SD card reader, Rotary encoders and a 20-character x 4 line LCD display respectively. This 3D printer LCD Module has various features like: - Included adapter for RAMPS 1.4 board, Popular RepRap 3D printer LCD controller, 3D design print without a computer; just use the G code design stored in the SD card, The smart controller by the encoder creates all other operations, such as calibration or axis movement etc and many more.

The 3D Extruder Head (JD Head) is an E3D V6 Hotend Short Distance J-Head Extruder Module. This Module comes without fan and PTFE tube. It has various features like: - High qualitative, Heat pipe compact size, Black quick ball, Inner screw thread connection and so on.It is mostly used in 3D printers.

The extruder hot end is one of the most important parts of a 3D printer.

NEMA 17  Stepper Motor BIG is for 3D printer applications and CNC applications and other various applications too. This device demands low speed with high precision. It is used in many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters, etc. Nema17 4 wire Bipolar Stepper Motor is High precision 4–wire bipolar stepper motor, size in Nema 17, 1.8 deg. step angle (200 … It is one of most parameters for the stepper motor. Users can use the A4988 or drv8825 driver to run this motor.

The 3D Printing Pen is for freehand drawing of 3D objects. It has quickly becoming a stable in homes and in offices. It is a great device for creative kid or for an adult whose imagination cannot be contained in a paper. It has features of advanced thermal control, filaments jamming detection, and super silence design. Also, slender pen body suits hands use, Speed can be changed by single finger, Plastic heats up and then cools to a solid shape and many more. It is a wonderful gift for creative children and adults. 

Small Stepper motor (High torque) for applications like Micromouse.

Features:

• Tapped Holes on 4 corners.
• 12V 0.3Amp in bipolar mode.
• Weight : 220 gm
• Dimensions :42 x 42 x 34 mm
• 5 mm Standard Shaft 24 mm length
• Torque 3.1kgcm
• Ideal for micromouse due to its low weight to torque ratio.

Usage:

• Connect +ve to 2 Common wire and drive 4 coils with drivers such as ULN2003/ULN2803 for driving in Unipolar mode. This ic's will not work directly with this motor since current capacity is less. However 2 in parallel can drive this motors.
• Connect H-bridge / Chopper Drive to 4 wires to use in Bipolar mode.

Wiring Details:

• A+ = Blue
• A- = Yellow
• B+ = Red
• B- = Green

Package Includes:

• 1 x NEMA17 HIGH TORQUE STEPPER MOTOR SMALL