The ESP32-C3 is a low-cost, power-efficient WiFi and Bluetooth development board based on the ESP32-C3 chip from Espressif. It features a RISC-V 32-bit single-core processor, integrated WiFi 4 (802.11 b/g/n) and Bluetooth 5.0 (LE), and is designed for IoT applications.

Key Features:

• CPU: 32-bit RISC-V, single-core, up to 160 MHz
• RAM: 400 KB SRAM
• Flash Storage: 4MB
• Wireless Connectivity:
  • WiFi 4 (802.11 b/g/n)
  • Bluetooth 5.0 LE (supports Long Range and Mesh)
• GPIO Pins: 22 (Multipurpose: ADC, SPI, I2C, UART, PWM, etc.)
• USB Interface: Native USB 2.0 for programming and serial debugging
• Low Power Modes: Deep Sleep & Light Sleep for battery efficiency
• Security: Secure Boot, Flash Encryption, AES-128/256, HMAC, Digital Signature
• Operating Voltage: 3.3V

This kit includes essential components for getting started with ESP8266-based projects. Ideal for IoT applications, wireless automation, and microcontroller programming, the kit provides a convenient way to prototype and test WiFi-enabled projects.

Items Included:

•  ESP8266 WiFi Module – A powerful microcontroller with built-in WiFi for IoT applications.
•  CH340 USB to TTL Converter – Easily program and communicate with the ESP8266.
•  Breadboard Power Supply – Provides regulated 3.3V and 5V power for prototyping.
•  Breadboard (400 points) – A reusable platform for circuit assembly.
•  Jumper Wires (M-M, F-F, 10 each) – Essential for easy connections between components.

Perfect for beginners and experienced developers looking to create smart home devices, IoT applications, and wireless sensor networks.

The Pro Micro Atmega32U4 5V/16MHz Board Module is a versatile and compact development platform designed for electronics enthusiasts and developers. It features a USB Type-C connector, making it easy to connect and program. With an ATmega32U4 microcontroller at its core, it provides ample computing power for various applications. This board offers an array of GPIO pins and supports a wide range of interfaces, making it ideal for prototyping and building custom projects.

ESP32 with 3MP (Mega Pixels) OV3660 wide-angle camera

The ESP32-CAM Development Board with OV3660 Camera and Mainboard is a compact and versatile module ideal for IoT applications. The OV3660 camera supports a wide 115-degree angle and night vision mode, making it suitable for surveillance, security, and remote monitoring projects. With the built-in ESP32 chip, this board offers Wi-Fi and Bluetooth connectivity, allowing for real-time image capture and processing. It also includes a USB programming interface, making development and deployment easy. 

Pure Silver Aluminium Heat Sinks
- Compact, and able to fit in most Raspberry Pi cases (Including all our cases).
- 3M heat conducting thermal tape pad on each heat sink for easy application
- Compatable with latest Raspberry Pi 2 Model B / Pi 3 Model B

The J-Link OB (on-board), emulator unit is intended for use with eval boards. It is fully compatible with and same features as regular J-Link, but is an inexpensive solution for complete evaluation kits with debug functionality. JTAG, SWD + SWO is supported Virtual COM Port (K22-Cortex-M, K22-Cortex-A, STM32F072, SAM3U). Compatible with most IDEs with a very small form factor. Feuatures a "Drag-And-Drop" interface for intuitive programming of the target device

• Barrel Input Connector for DC Voltage Input for AC/DC Adapters (6-24VDC)
• All NodeMCU Lolin V3 pinouts are brought on headers
• Multiple Header pins for ease of connectivity with other external devices
• On-Board Switch-mode 5V regulator
• Power Supply Headers for :
  • VIN
  • +5V
  • 3.3V
  • USB VCC / VUSB
• Antenna Mark for Correct orientation of the NodeMCU module insertion
• Onboard LED indicator

Technical Specifications:

• Input Voltage: 6V – 24V DC
• PCB Thickness: 1.6mm
• NodeMCU Pin Distance between sides: ~28.0mm
• Pin Pitch: 2.54mm (0.1in)
• Board Dimensions: 60.0mm x 60.0mm x 15.0mm (L x W x H)
• Weight: 22.5 g

Specification:

• Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• 4 GB LPDDR4-2400 SDRAM
• 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
• Gigabit Ethernet
• 2 USB 3.0 ports; 2 USB 2.0 ports.
• Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
• 2 × micro-HDMI ports (up to 4kp60 supported)
• 2-lane MIPI DSI display port
• 2-lane MIPI CSI camera port
• 4-pole stereo audio and composite video port
• H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
• OpenGL ES 3.0 graphics
• Micro-SD card slot for loading operating system and data storage
• 5V DC via USB-C connector (minimum 3A*)
• 5V DC via GPIO header (minimum 3A*)
• Power over Ethernet (PoE) enabled (requires separate PoE HAT)
• Operating temperature: 0 – 50 degrees C ambient

Package Includes:

• 1 x RASPBERRY PI 4 MODEL B - 4 GB RAM

• Antenna Included
• Works with Arduino, Raspberry Pi, ARM, AVR, PIC and other controllers
• Longer range than Bluetooth, WiFi, Zigbee
• Applications include, Automated Meter Reading, Home and Building Automation, Wireless Alarm and Security Systems, Industrial Monitoring and Control, Long range Irrigation Systems, Smart City

Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps

• Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
• Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
• 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm

Item: Flight controller board

Input voltage: DC 5 – 6V

Working temperature: 0-50 ° C

Performance: horizontal self-stabilization, manual flight, 3D lock.

Flight Modes: Beginner, Practice, Intermediate & Expert.

Automatic Aileron Leveling.

3D AVCS Flight, Attitude Locking.

Provide Y-wiring For Aileron.