Max 30 mins flight time
View battery status via DJI GO app
Self-discharge protection
Over-charge and discharge protection

Features

• Very small size
• Light weight (under 4 grams without antenna)
• 433Mhz frequency band
• Receiver sensitivity to -140 dBm
• Transmit power max 30dbm (1000mW @ 9600bps)
• Transparent serial link
• Air data rates up to 250kbps
• Range of approx 1 mile with supplied antennas
• Demonstrated range of several kilometers with a small omni antenna
• Can be used with a bi-directional amplifier for even more range
• MAVLink protocol framing and status reporting
• Frequency hopping spread spectrum (FHSS)
• Adaptive time division multiplexing (TDM)
• Support for LBT and AFA
• Configurable duty cycle
• Built in error correcting code (can correct up to 25% data bit errors)
• Open source firmware
• AT commands for radio configuration
• RT commands for remote radio configuration
• Adaptive flow control when used with APM
• Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF microcontroller.
• Upgraded to more convince Molex 1.25mm

Specifications:

• Band: 433MHz
• Antenna connectors: RP-SMA connector
• Output power: 1000mW (30dBm), adjustable between 1-30dBm
• Sensitivity: -140 dBm sensitivity
• Interface: Standard TTL UART
• Connection status: LED indicators

Package Includes:

• Radio Telemetry base station (USB Connection)
• Telemetry Transceiver (Pin Header)
• lead set x 1
• Antenna x 2

*2Km range is only possible when used in proper weather condition, very low air data rate and line of sight Ground-Air. With default settings and full transmit power on both ends the range is around 300-500 meters.

The Apm 2.8 Flight Controller is a  ArduPilot Mega board that uses Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing for better flight control. It can control Planes, Copters and Rovers. It is also applicable for various DIY projects.

Capacity: 3830 mAh

Voltage: 11.4 V

Battery Type: LiPo 3S

Energy: 43.6 Wh

Net Weight: Approx.0.5 lbs (240 g)

Operating Temperature: 41° to 104° F (5° to 40° C)

This remote works basically in the frequency range of  2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.It has Silm design on transmitter for easy handling.This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. It Is associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission.This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.

Fpv Axis Brushless Gimbal With Controller For DJI Phantom Gopro 34 (2axis gimbal) doesn`t have to assemble and debug. Users have to connect the power after installing the product. This device is especially for DJI Phantom and Walkera QR X350 quadcopter also can work with other Multi-rotor. It is simple in structure and lightweight too. It has a CNC aluminum alloy structure. Very easy to adjust.
 

The S550 six-axis rack is a lightweight hexacopter frame featuring carbon fiber landing gear and a durable PCB with immersion gold plating for ESC and power distribution. It supports six motors, offers stability for aerial photography, and is compatible with various flight controllers, making it ideal for professional and DIY drone applications.

Key Features:

1. Material:

   • Arms: Typically made of durable and lightweight carbon fiber or glass fiber. This enhances the stability and reduces vibrations, making it ideal for aerial photography.
   • Landing Gear: Carbon fiber landing gear provides durability and shock absorption, supporting the overall stability during landings.

2. Size and Compatibility:

   • It supports six motor mounts, making it a hexacopter.
   • Compatible with various flight controllers (e.g., Pixhawk, APM, Naza).
   • Provides sufficient space for mounting batteries, gimbals, and cameras.

3. PCB Design:

   • The frame integrates a PCB (Printed Circuit Board) with immersion gold plating for soldering the ESCs (Electronic Speed Controllers) and power distribution.
   • This feature minimizes wire clutter and ensures efficient power delivery to all motors.

4. Weight and Payload Capacity:

   • The lightweight design allows it to carry significant payloads such as gimbals and cameras for professional aerial photography.

5. Ease of Assembly:

   • Modular design with clear mounting points for ESCs, motors, and flight controllers.
   • Foldable or collapsible options for easy transport (depending on the model).

KK 2.1.5 Multi-Rotor Control Board is the next Big/Small evolution of the first generation KK flight control boards. It utilizes a built in GUI using a high resolution mini LCD and 4 micro buttons for the KK experience. It is designed to provide benefit to bring multi-rotor flight to everyone, not just the experts. It has updated gyro system to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. It can applicable for various flight quadcopters.

30*27*1000mm

3K Roll Wrapped Carbon Fiber Tubes are made from 100% pure carbon fiber with an epoxy resin matrix, offering high strength, lightweight, and durability. Available in 28mm inner and 30mm outer diameters, these tubes are ideal for applications in drones, robotics, kites, camera rigs, and more. Manufactured with premium Taiwan/Japan Toray carbon fiber, they provide excellent performance and can be customized in wall thickness and length.

The new NAZE32 REV6, compared REV5 greatly optimized PCB layout, better wiring, and the sensor portion also made a very big evolution, using a new generation of more accurate sensors.

Flight Modes: Beginner, Practice, Intermediate & Expert.

Automatic Aileron Leveling.

3D AVCS Flight, Attitude Locking.

Provide Y-wiring For Aileron.