The 40 Pin ZIF Dip IC test board socket are commonly used on programming units and IC testers, transistors. It is easy to remove and to program ICs with great pin contact with a lever. It is also known as IC sockets.

The 28 Pin ZIF Dip IC test board socket are commonly used on programming units and IC testers, transistors. It is easy to remove and to program ICs with great pin contact with a lever. It is also known as IC sockets.

The TMP36GZ IC is a Temperature Sensor Module having various features like: - Operate on low voltage, 10 mV/°C scale factor, ±2°C Temperature accuracy, ±0.5°C linearity, External Calibration not required, Stable with large capacitive loads, Specified −40°C to +125°C, operation to +150°C, Less than 50 µA quiescent current, Auto Shutdown current 0.5 µA max and low self-heating qualified for automotive applications etc. It provides a voltage output that is linearly proportional to the Celsius temperature. It requires 2.7 V to 5.5 V voltage range supply for operations. It can be suitable for various applications like: - Environmental control systems, Thermal protection, Industrial process control, Fire alarms, Power systems monitors, CPU thermal management and many more. 

The AT Mega 8 AVR RISC-based 8-bit microcontroller microchip. IT approach 1 MIPS per MHz by executing powerful instruction in a single clock cycle. It has 8 kb flash memory with 512B EEPROM, 1 KB SRAM. It is mostly used in many projects where a simple low-powered microcontroller is required. It has a chip 2 cycle multiplier with 32 general purpose working registers.

 The AT Mega 16 AVR RISC based 8 bit microcontroller microchip. It has 131 powerful instruction for single clock cycle execution. It has 16 kb flash memory with 512B EEPROM, 1 KB SRAM. It is mostly used in many projects where a simple low powered micro controller is required. It has on chip 2 cycle multiplier with 32 general purpose working registers.

 The AT Mega 32 AVR RISC based 8 bit microcontroller microchip. It has 131 powerful instruction for single clock cycle execution. It has 32 kb flash memory with 512B EEPROM, 1 KB SRAM. It is mostly used in many projects where a simple low powered micro controller is required. It has on chip 2 cycle multiplier with 32 general purpose working registers. It is mostly used in small projects, with Arduino boards.

The LM324 has four independent operational amplifiers with 14 pins. It can operate wide range of voltage from a single power supply. It is generally used in the line following robot, applicable for oscillators, comparators, rectifiers, amplifiers etc. Its application are transducer amplifiers, DC gain blocks and conventional Op Amp circuit

 The ULN2803 is Darlington transistor array with a high voltage and high current. For switching the loads connected to the output it has eight NPN Darlington connected transistors with common clamp diodes. The input is compatible with various types of logic. It is also compatible with ULN2800A series. Its application are relay drivers, hammer drivers, lamp drivers, logic buffers and many more.

The ULN2003 is Darlington transistor array with a high voltage and high current. For switching the loads connected to the output it has seven NPN Darlington connected transistors with common clamp diodes. The input is compatible with various types of logic. Its application are relay drivers, hammer drivers, lamp drivers, logic buffers and many more. 

 The LM 393 has two independent precision voltage comparators. This IC is designed in such way that over a wide range of voltages can be operated by single power source. The output voltage is compatible with DTL, ECL, TTL, MOS and CMOS logic levels. It is mostly used in chemical or gas sensor, desktop pc, weight scale and many more.

The Lm339 operates a wide range of voltage from a single power supply. It has four voltage comparators.  The ESD clamps on the input increase reliability without affecting device operation. It is used in level detection, low level sensing and many more.

The L293D Motor Driver IC is an Aquadruple high current half-H driver. It is designed to provide bidirectional drive currents of up to 600 mA at voltages from 4.5 V to 36 V. It can be applicable for various drivers such as: - stepper motor drivers, DC motor drivers, Latching relay drivers and so on.