• This power module is designed and manufactured in an industrial grade , adopts double-sided PCB design, and the performance is more stable and more reliable. It is suitable for power supply of civil or industrial control systems.
• The rated output power is DC 24V 1A 24W, and the peak output can reach DC 24V 1.5A 36W. Long-time work recommended output 1A 24W
• Input voltage: AC 100- 265V 50/60HZ (wide voltage input, suitable for various use environments).
• Output voltage: DC24V ( ±0.5V). Output current: 1A / Peak 1.5A. Ripple noise: ≤150MV.（When the output exceeds 1.5A, it will enter the protection state.）
• Product size: 6.9101x3.6208x2.5cm (LxWxH). Compact and with indicator light.

Model: HX - 2s - D01

charging pressure range: 4.25V ~ 4.35V ±0.05

discharge voltage range: 2.5V ~ 3.0V ±0.05

Maximum working current: 8A

working temperature: -40 ~ +50 °

Maximum instantaneous current: 10A

storage conditions: -40 ~ +80 °

Static electricity: less than 10uA

useful life: more than 50000 hours

Resistance: less than 300mΩ

short circuit protection: to protect and restore must charge

Charging voltage: 8.4V - 9V

This industry power module converts AC power to 12V 2A DC. It has built-in over-voltage, over current, and short circuit protection. Perfectly designed and well constructed, small and compact Size with an indicator.

Features:

1. The efficiency is as high as 80 to 90%.
2. Less heat generation; less power wastage.
3. Reduced harmonic feedback into the supply mains.
4. The device is compact and small in size.
5. The manufacturing cost is reduced.
6. Provision for providing the required number of voltages.

Package Includes:

1 x AC-DC 12V 2A Switching Power Board.

The HCW-M203, also known as the XH-M203, is an automatic water level controller module designed to manage water levels in various applications such as water tanks, reservoirs, and pools. It operates by automatically controlling a pump or valve to maintain the desired water level without the need for manual intervention.

Key Features:

• Operating Voltage: AC/DC 12V
• Output Capacity: 10A relay output
• Control Type: Fully automatic
• Dimensions: Approximately 60 x 40 x 18 mm
• Installation: Equipped with M3 screw holes for easy mounting

The FTDI USB to TTL serial converter module is a UART (universal asynchronous receiver-transmitter) board used for TTL serial communication. It is popularly used for communication to and from microcontroller development boards such as ESP-01s and Arduino micros.

The XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation.

This product is a 180 kHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency,  low ripple, and excellent line and load regulation. 

The DC/DC buck module has applications where the input voltage is higher than the output voltage, such as battery, power transformer, DIY adjustable regulated power supply, LCD Monitor and LCD TV portable instrument power supply telecom/networking equipment, 24V vehicle notebook power supply, industrial equipment buck.

This module has an adjustable output Voltage. Also works as a dedicated charger for Lithium Batteries (Li-Ion, LiPo) as it is capable of controlling voltage. Ex. 12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V,24V buck to 12V, 36V buck to 24V, etc.

The four channel solid state relay module has many no moving parts .It is faster, reliable and has longer life than of traditional mechanical relay. The four channels can be controlled separately. It can be used in various areas such as computer peripheral interface , temperature/speed adjustment etc.

It is a best  solution for displaying the output data of your Arduino project. Though the data displayed is restricted by numbers still it allows users to display some characters too like A, B, C and many more.This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. 

It is basically digital display for Ultrasonic Distance Measurement Control Board .This electronic device adopts 8 bit MCU as the main control chip. It can be applied in distance measurement, testing HC-SR04 ultrasonic module performance. And it supports serial port display and digital tube display.

This type of boost module uses conventional BOOST complete constant voltage output scheme.It has  internal integration of MOSFET too.

This product is a 180 kHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation.    

5Amp Boost Module With 2USB is an efficient switching regulator and the output efficiency is significantly higher in comparison with the popular boost regulators.