The 3.5-inch TFT LCD display is a high-resolution, full-color screen designed for Arduino and microcontroller projects that require graphical output. Unlike touch-enabled versions, this module focuses solely on display functionality, making it ideal for applications that do not require user input via touch.

Key Features:

 Screen Size: 3.5 inches
 Resolution: 480 × 320 pixels
 Interface: Parallel (8-bit)
 Driver IC: ILI9486
 Operating Voltage: 3.3V or 5V (varies by module)
 Compatibility: Works with Arduino Uno
 Backlight: Integrated LED backlight for clear visibility
 PCB Design: Compact module with pre-soldered pin headers for easy connectivity

3.2 inch SPI Touch Screen Module TFT Interface 240*320 without Touch is a compact, high-quality display module that can be used in various electronic projects. It is an excellent choice for projects that require a small, high-quality display without touch. It is ideal for use in applications such as portable devices, embedded systems, and other electronic projects that require a clear and easy-to-use display.

The module is designed to communicate with a microcontroller or other host device through a Serial Peripheral Interface (SPI), which makes it easy to integrate into a variety of projects.

Features:

• 3.2-inch color screen, support 65K color display, display rich colors
• 320X240 resolution, non touch function
• Using the SPI serial bus, it only takes a few IOs to illuminate the display
• Easy to expand the experiment with SD card slot
• Provide a rich sample program
• Provide underlying driver technical support

The 0.96-inch White OLED Display Module is a high-contrast, self-illuminating display used in electronics projects, IoT applications, and compact devices. Featuring a sleek design, it provides crisp white text and graphics on a black background, making it highly visible in both low and bright lighting conditions. Its small size and low power consumption make it ideal for battery-operated systems and compact embedded designs.

Description

• Display Type: OLED (Organic Light Emitting Diode)
• Color: Bright White (monochrome) on a black background
• Size: 0.96 inches, compact for small-scale projects
• Technology: Self-illuminating, no backlight required, with wide viewing angles and excellent contrast
• Controller IC: SSD1306, which is widely supported by libraries for Arduino, ESP32, and Raspberry Pi

he 0.96-inch Blue and Yellow OLED Display Module is a compact display designed for microcontroller projects. It features a high-contrast, self-illuminating OLED panel that doesn't require a backlight, offering sharp visibility in both low and bright light conditions. The screen is divided into two regions: the upper section is yellow, while the lower section is blue, commonly used for displaying different types of information.

This display is widely used in DIY electronics, IoT projects, and small devices like clocks, meters, and compact interfaces.

Key Features

• Dual Color Display: Yellow on the top portion (useful for headers or titles) and blue on the bottom (for detailed information).
• High Contrast: OLED technology ensures bright and sharp output, even in dim lighting conditions.
• Low Power Consumption: Ideal for battery-powered projects.
• Compact Design: Fits easily into small spaces.
• Multiple Protocol Support: I2C or SPI for versatile connectivity

The 2.8-inch TFT LCD module features a 320x240 pixel resolution and supports 65K colors, making it ideal for vibrant displays. With an ILI9341 driver and a 4-wire SPI interface, it offers easy integration and minimal I/O requirements. This module includes touch functionality and an SD card slot for expanded capabilities, all designed to operate reliably within a temperature range of -20°C to 70°C.

Enhance your Arduino projects with this versatile 2.4 inch TFT LCD touch screen module, compatible with both Arduino UNO R3 and Mega2560 boards. Featuring a 320x240 resolution and 65K RGB color support, it delivers vibrant visuals. With low power consumption and integrated touch functionality (including a touch pen), this module is perfect for interactive applications. Easy to install with an 8-bit parallel interface and an SD card slot for expanded capabilities. Includes a comprehensive Arduino library to simplify development.

he set consists of 3 pieces of Blue heatsinks, in sizes 14 x 14 mm, 14 x 10 mm, 9 x 9 mm . On the back of each one there is double sided, thermally conductive tape . Heat sinks are designed to cool Raspberry Pi 4 minicomputer. Heat sinks are mounting elements used to cool the chips. The surface on the outside is covered with fins.

• Colour: Blue
• Mounting: double-sided thermal conductive tape
• Dimensions:
  • 1. heatsink: 14 x 14 x 5 mm
  • 2. heatsink: 14 x 10 x 5 mm
  • 3. heatsink: 9 x 9 x 5 mm

Specifications:
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

-Using a large screen 12864LCD(3.2’’), it can support 8 GB
-With a SD Card base on back, put slicing file into the SD Card and select the file on the LCD, then can be printing
-Adapter for RAMPS 1.4 RepRap Electronics is included
-Plug and play on the RAMPS, but need to modify the firmware to support
-Proudct comes encoder parameter adjustment can be achieved, and the file selection print
Package Size:6.5 x 4.6 x 2.8 inches
Package Weight:7.2 ounces

Package Included:
1 * 12864 LCD Control Panel (SD card not included)
1 * Connector
2 *30cm FC Cable

It is a best  solution for displaying the output data of your Arduino project. Though the data displayed is restricted by numbers still it allows users to display some characters too like A, B, C and many more.This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. 

20×4 LCD Display is required if you want to add some visual output to your Arduino projects. If you have few IO lines to play with, the Parallel 20×4 LCD Display with IIC/I2C interface is a quite good solution. The display is 20 character by 4 line display that has a very clear and high contrast white text upon a blue background/backlight.

This monitor has built-in -high -quality speakers. This device has a high-resolution screen that will cater to your fresh image and video experience. 

It is basically a seven-segment output display device that provides a way to display information in the form of image or text or decimal numbers which is an alternative to the more complex dot matrix displays. It is widely used in digital clocks, basic calculators, electronic meters, and other electronic devices that display numerical information. It consists of seven segments of light-emitting diodes (LEDs) which are assembled like numerical 8.It can operate at a high voltage of 20V. It is ideal for low-power displays. It can both counter and decode in a single IC.